Minoura W-150 Manuel d'utilisateur télécharger pdf (Page 4)

–

Install Foot Pedal on Front Leg.

The pedal can be installed on any side. Choose your favorite side for

installation.

First, remove the srew and the narrow metal collar on the top bracket.

①

Remove the screw from the top bracket.

(already described in Step-8).

②

Insert the inner cable into the slit on the End-

Plug Hook. The end-plug must be horizontal to

fit the bracket naturaly.

Attach the outer cable end to the 2nd bracket,

and put the cable into the slot of the 3rd bracket.

③

Tighten the screw and narrow metal collar

again to keep the cable end plug in position.

④

Put Foot Pedal on Front Leg and tighten the

backside knob bolt.

You don't need to tighten the

knob bolt rmly.

How To Install Clamp Jaws

Hook the cable end plug to the bracket which controls Gas

Dampener.

The plug should be caught with both sides of bracket.

Placing the plug in the groove is not good.

Clamp Jaws

Push down the lever

Flat Washer

Knob Nut

Lock

Release

Hook

Install Clamp Jaws.

Insert the clamp axle from foreside of the stand.

Outer edge of the clamp is designed as dog clutch

gears to fix the clamp at certain angle. This

sometimes disturbs the clamp insertion, so you

should push down the Lock Lever for easier job.

Put a flat washer and Lock Release Hook to the

axle then tighten Knob But.

The hook can set in any direction.

If you have tightened the backside knob nut too

much, the clamp won't rotate smoothly.

The ideal condition is you can rotate the clamp

smoothly without any backlash.

Locking Gear

Axle

Outer Cable Guide

Inner Cable Guide

End-Plug Hook

Attach Outer Cable End Here

Insert Outer

Cable

1 2 3 4 5 6

Commentaires sur ces manuels

Pas de commentaire

Minoura W-150 Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Pour les vélos Minoura W-150